Chinese bulldozer

Chinese bulldozer
1, the speed of advance and retreat
When shifting Guadang should first push forward the throttle handle to a low idle position, then the main clutch lever pushed to the front, so that the main clutch, the role of the main brake clutch small, so that the input shaft of the transmission stops . At this point, you can shift to the desired gear benchmark correctly, then retreat into the rod forward or backward position (when the bulldozers move forward, pull back the lever back and forth, back when it is pushed forward). After Guadang, pull back the throttle lever to increase the engine speed, and smoothly connected to the main clutch, bulldozers began traveling.
When the bulldozer driving, should the main clutch lever pulled last party, not on the half-engaged position. Because the main clutch engagement will increase the friction plate semi wear.
Bulldozer transmission generally have five forward gears and four backward gear. You can use the lever back and forth to change the direction of travel of the bulldozer.
Bulldozer when the job should be possible to run at top speed, in order to improve operational efficiency. But the driver should always pay attention to whether the normal operation of the engine and found that black smoke when the engine and exhaust overheating, should be appropriately reduced speed.
2, steering
Hydrostatic bulldozer When traveling in turn, can be turned to the side of the steering clutch lever is pulled back, the steering clutch, so the corresponding side track speed slows down, bulldozers began to shift. To make a sharp turn bulldozers, except separate steering clutch, it should also depress the brake pedal corresponding generally run only when Ⅰ gear allows for sharp turns. When not using the brakes should not be placed on the foot brake pedal, otherwise it will lead to brake with wear and fuel consumption increases.